CENTRAL VACUUM UNIT / GENERAL INFORMATION
 
Central Vacuum Unit, 2,2 bis 160 kW
Central Vacuum System can vacuum-up different material like dust, splinters as well as liquids by utilising a central piping network. Depending on the respective requirements the material can be sucked into an intermediate pre-separator or directly into the central filter separator.
 
The unit consists of:
•
 Piping Network with various connection plugs
•
 Filter Separator and optional Pre-Separator
•
 Vacuum aggregate
 
 
 
The Central Piping Network is made of steel pipes adapted to the respective conditions and air volumes required. The pipes are joined by means of easily removeable clamps without a necesity of welding and facilitating an easy exchange upon wear-off. The pipe bends are either made of steel in large radius or rubber to minimise wear and drag. The self sealing hose couplings are available in the nominal sizes from 38 mm to 200 mm and upon demand can be equipped with a micro switch to facilitate immediate operation.

The Pre-Separators are available in the most different designs and layouts to suite all possible applications.

Filter Separators are available in sizes ranging from 2 to 160m2 filter surface. Different discharge systems, container sizes, coated and antistatic filter materials, filter cleaning methods, level regulator and supporting steelwork are available depending on requirement. This ensures that the system can be integrated into an (existing) production process.

Vacuum power packs in the range of 300 m3/h - 11,000 m3/h and a vacuum capacity of up to 900 mbar are available. The power unit consists of an acoustic enclosure which houses the pump and the motor complete with safety filter, relief valve and any additional protective sensors that may be required. The control switch box is fitted to the outside of the sound hood and is available with additional functions to suite for the respective duties required.
 
Our extensive modul principle ensures the best possible layout of the total system and a cost-saving application. We plan each Unit individually together with our clients in order to achieve the best possible solution respectively.